Scrub-resistant and resistant to cleaning agents. Better adhesion. Unsaponifiable and alkali-resistant. Smooth sheen Pleasant odor. Better colour retention. Allows better flow and dries faster.
Basic characteristics at 20 °C. Solid Content: approx. 50-55% by weight Flash Point: above 90 °C. Vehicle: Special Acrylic-Emulsion. Degree of Gloss: Min 30 at 85 °C angle
Colours: Refer to shade card.
Storage: Store at room temperature between 5 C- 48 °C
Safety Advice: Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of clean water.
Waste Removal: Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
Packaging: 1 litre and 4 litres, 10litres, 20 litres containers & 200 litre drums.
Preferably by brush or roller. Can also be sprayed.
Brush and other tools must be cleaned with soap water immediately.
16-18 Sq.m / litre (depending on surface)
20 minutes , can be recoated in 2-3 hours
Suitable Surface and their Preparation
The surface must be dry, free from dust and other such separable substances that may
prevent good adhesion.
The type of surface-preparation depends on the available surface and it's condition and plastered surfaces must be allowed to dry and be cleaned properly. Lime containing plasters or materials should be neutral.
If reacting alkaline, flush with sweet water till it becomes
neutral. Multilac Acrylic Filler could be applied as an under coat for a better finish.